Total Pipe
Robotic Solutions
Company

A specialty robotic contractor, built by people who did this work first

TPR-Group was founded to do the work conventional crews turn down — and to hand back data an engineer can actually build a capital program on. Advanced technology, exceptional results, and 75 years of combined experience knowing which is which.

Veteran-ownedPacific Northwest75+ years combined experienceNASSCO certified
Who we are

We did this work for decades before we owned a robot.

Between our owner and our production manager there are seventy-five years in trenchless pipe infrastructure — robotic CCTV, robotic and ultra-high-pressure water jet cleaning, and CIPP lining. Both built and ran specialty contracting companies of their own before this one, from the contractor’s side of the job rather than the sales side. TPR-Group is a veteran-owned specialty services contractor working in robotic pipe cleaning, CCTV inspection, 3D mapping and ultra-high-pressure water cutting.

That background shapes what we bought and how we run it. Every platform in our fleet was selected because it solved a problem we had already hit on a job site: a stack in an occupied tower, a lateral with no as-built, a tap that a mechanical cutter would have wrecked the liner removing, an easement four hundred feet from the nearest place you could park a truck.

We run every platform ourselves rather than subcontracting the difficult half of a scope. We size the crew and the equipment to the job — some work is two technicians and a service van, some needs a vacuum truck and a pump trailer alongside it — but it is our people and our equipment either way. The scope does not change hands halfway through, and nobody has to be scheduled around.

Ultra-high-pressure cutting has been our principal’s work since the method first reached the United States, including training operators and crews on it across North America and internationally. We are rebuilding the field team around technicians who worked with him before this company existed.

HOW WE WORK

Five commitments

  • Certified coding, always. PACP, MACP, LACP and BSDI by certified operators, kept current through NASSCO PipePros.
  • Every technician certified on every platform. Safety-trained on all equipment they operate, with particular rigor on ultra-high-pressure pumps and robotic systems.
  • The right platform, not the expensive one. We own all of it, so we gain nothing by oversizing your scope.
  • Nobody enters the pipe. Confined-space exposure eliminated rather than permitted around.
  • Data you can use. Deliverables land in your asset system, not in a drawer.
Experience

Where the experience comes from

DISCIPLINE 01

Robotic CCTV

Decades of mainline, lateral and manhole inspection work across municipal, commercial and institutional systems — including the coding, reporting and asset-system integration side that most field crews hand off.

DISCIPLINE 02

Robotic & UHP jet cleaning

High-pressure and ultra-high-pressure cleaning and cutting across diameters and deposit types, with the judgment about pressure, nozzle and approach that only comes from having got it wrong once.

DISCIPLINE 03

CIPP lining

Having installed liner, we understand exactly what a careless reinstatement does to one — which is why our reinstatement work is done with water and a camera on the cut rather than a blade and a stopwatch.

Footprint

Based in the Pacific Northwest. Working anywhere the asset is.

Crews run out of Olympia, Washington and work across the Pacific Northwest — same platforms, same certifications, same deliverable format on every job.

Beyond the Northwest, the flyaway service means we can take a job anywhere in the country without waiting for a base to exist first — and that is how the second base gets chosen. We are not guessing at a map. Where the flyaway work repeats, that is where people and equipment go on the ground permanently. If you are somewhere we do not have an office yet, that is a scheduling conversation, not a no.

Operating base

Olympia, Washington

730 O’Leary St NW
Olympia, WA 98502
WA REG. INSPEL*760PG 253.320.1350
Everywhere else

The flyaway service

Robots ship in transit cases.
The crew flies.
Nationwide
Wide view of a crew and equipment working from a barge on a waterway
Seventy-five years of combined experience, most of it on the jobs nobody else wanted. Our leadership built this company out of specialty contracting work where the access problem came before the pipe problem — and that is still the work we are best at.

Project photography from work performed by our crews and by our leadership’s prior companies. Client-identifying detail removed.

The Flyaway Service

The robots fly. We rent the rest when we land.

Our mainline inspection platform and our multi-function traction robot break down into hard transit cases and ship anywhere in the country. The crew flies commercial. Everything else — service van, vacuum truck, ultra-high-pressure pump trailer and water supply — we arrange in the local market before we land. That puts a full-capability crew on a high-profile site in days, instead of a truck and trailer spending a week on the interstate getting there.

WHAT SHIPS

The robots

The 40 lb mainline inspection platform, robot at 12 lbs, 6" to 48" and 2,000 ft of reach. The 78 lb multi-function traction robot, seven tools on one chassis. Both case up and move as freight or travel with the crew.

WHAT WE SOURCE

Everything with wheels

Service van, vacuum truck, ultra-high-pressure pump trailer and water supply, arranged in the local market and staged for the day the crew arrives. The support equipment is rentable almost anywhere. The robots and the people who run them are not.

WHAT YOU GET

Full capability, fast

Inspection, assessment, NASSCO coding, 3D mapping, robotic cleaning and 40,000 psi cutting — the whole service line, two thousand miles from our yard, without a cross-country mobilization sitting on your invoice.

Built for the sites where the schedule is the problem: remote military installations, federal and government campuses, and industrial plants a long way from any specialty contractor. Tell us where the asset is and when you need a crew standing on it, and we will tell you what a flyaway looks like.

Work with a contractor that owns its own robots.

We own the fleet we run, and we rent additional platforms direct from our manufacturers when a project calls for something outside it. One crew, one mobilization — and data your engineer can sign.